I am currently an Executive Director Software Engineer in the Asset Management division of JP Morgan Chase. I am an expert in designing and building highly scalable and robust Cloud Computing based systems in Kubernetes and AWS to build solutions and solve problems in portfolio management and portfolio optimization.
In this episode we review Tandy Assembly 2019. There were lots of additions to the show this year including the new Tech Track. What worked well and what worked not so well? There’s the usual segments on new projects, new acquisitions, listener feedback and the book review. We talk about JetSet which is a flight simulator for the TRS-80 Model II! There’s some discussion about ARCNET, CP/M Plus and floppy disk baking. Then, in our main segment, we talk to TRS-80 Model 100 enthusiast Josh Malone. Josh gives us a great overview and then a detailed rundown of this most famous portable computer.
After a lot of effort from many members of the community, I am proud to present a collection of Tandy ARCNET software for the TRS-80 Model II/12/16/16B/6000 microcomputers.
For the past few months I’ve been working on a project that I’ve been pondering for a long time. If you follow my vintage computing exploits, you know that I get the most satisfaction out of combining retro technology with modern cloud-based systems. This allows me to combine my passion for both vintage and new technology, ie. my hobby and my real-world day-job passions and skills.
The first step in developing software using modern tools for any vintage computer is being able to reliably transfer files between the modern and vintage systems. I plan to do most of the development and cross-assembling of TRS-Box on my MacBook Pro using OSX. In this way I can take advantage of a modern editor and assembler which makes development much easier than developing on the Model II. I love my Model II, but actually using it for software development would
be slow and tiresome today. So, I need a way of copying the finished program executable to the Model II for testing. The built in serial file transfer utilities of TRSDOS 2.0 are not great, especially for trying to communicate with a modern system. Luckily, we have a copy of the excellent OmniTerm for Model II software in the model2archive.
For the MacBook side, I use the very capable Serial program for all my serial port communication needs. It works well with all of my TRS-80s and operating systems. Also required are a couple of special serial cables. I’ve detailed the steps I followed if you would also like to copy files to your Model II running TRSDOS 2.0. There are many other ways to achieve this goal, but I found this configuration to work well. The steps should be similar if you are using Linux or Windows with a capable serial communication program. It is expected that you are familiar with how to use IMD disk images with your Model II.
- Set up the physical serial link between the MacBook and the Model II.
- You will need a 25 pin RS-232 Null Modem cable on the Model II side.
- For the MacBook, use an FT232R compliant USB-Serial adapter.
- On the Model II, you need to make sure you use serial port A. It is recommended that you have another serial device or a serial terminator on port B. The Model II Owner’s Manual shows how to create a serial terminator.
Get the Serial program for the MacBook.
Get OminTerm running on the Model II. The OminTerm disk is not a bootable disk. Follow the instructions in the OmniTerm manual to set it up for single disk bootable operation if you only have a single disk drive. I have multiple disk drives so I use a TRSDOS 2.0 system disk in drive 0 and the OmniTerm disk in drive 1.
Setup the Serial program on the MacBook. Go to Terminal->Line Settings. I have been using 1200 baud, but
higher baud rates should work as well. The Model II has a maximum baud rate of 9600.
- Baud Rate: 1200
- Data Bits: 8
- Parity: None
- Stop Bits: 1
Set up the serial port in TRSDOS on the Model II.
- SETCOM A=(1200,8,N,1)
Before you start transferring files, you will want to verify that you have the serial connection properly configured. You can do this by running the OMNITERM program on the Model II. Once it comes up, anything you type on the Model II should show up in Serial on the MacBook and anything you type in Serial should show up in OmniTerm. If you have this working, then you are good to start transferring files. If not, then you need to go back and check your setup.
Now you are ready to start transferring files. On the Model II we will not be using the OMNITERM program since that is a general purpose terminal program. It does have ASCII based file transfer support, but we want to use something more reliable than traditional serial ASCII transfer. On the OminTerm disk there is a program called OMNIXFER. This is an XMODEM supporting file transfer program. XMODEM is a reliable serial file transfer protocol developed by Ward Christensen in 1977.
Once you run OMINXFER, it will ask you if you want to send or receive a file. Start with sending a file to the Model II so choose R. Then it will ask for a filename of the file you want to create in which to place the received file contents. The program will then wait for a file to arrive in XMODEM format on serial port A.
In Serial, got to File->Send File. Choose XMODEM as the Transfer Protocol. Leave the 1K block size unchecked. Choose the file to send and click Send File. You should see the file transfer begin between the two machines.
The process is reversed for getting files from the Model II to the MacBook. In Serial, go to File->Recieve File. Select XMODEM and Checksum error checking. Click on Receive. Then, on the Model II, run OMNIXFER. Select to send a file. Provide the TRS-80 file spec of the file you want to send and the file transfer will start.
One special consideration needs to be taken when working with TRSDOS 2.0. Model II TRSDOS treats data files and program files differently. When you receive a file on the Model II, you will need to run the OMNICONV program on the OmniTerm disk to convert the file to the proper type. For program files, choose Fixed Length and Program type. For data files, choose Variable or Fixed, depending on which type of data file you are transferring.
Hopefully you can now transfer files back and forth with Model II TRSDOS. Leave a comment to let me know how it works out for you.
GoferNote was an iOS app that I developed along with my partners and good friends at PBJ&H App Factory, Jamie, Harun and Becky...Hi guys! (if you're reading this). While we had it up and running and published to the App Store for several years, we did eventually shutdown the service rather than let it linger. It worked pretty well but we never achieved the momentum needed for success.
ParkShark was an iOS App developed with my partner Dmitriy Frenkel. This app had a dedicated iPad-only version as well.ParkShark was a parking information and parking space sharing service. It could be used in any city in the world, from Abidjan to Yokohama. It was ideal for use in larger metropolitan areas, where on street parking is at a premium.